This guide is a step-by-step installation guide for Alpine Linux. The instructions were verified against Alpine v3.10 standard image. You might miss additional dependencies if you use `netboot` instead.
It assumes that you have administrative rights, either as root or a user with [sudo permissions](https://www.linode.com/docs/tools-reference/custom-kernels-distros/install-alpine-linux-on-your-linode/#configuration). If you want to run this guide with root, ignore the `sudo` at the beginning of the lines, unless it calls a user like `sudo -Hu pleroma`; in this case, use `su -l <username> -s $SHELL -c 'command'` instead.
* The community repository must be enabled in `/etc/apk/repositories`. Depending on which version and mirror you use this looks like `http://alpine.42.fr/v3.10/community`. If you autogenerated the mirror during installation:
```shell
awk 'NR==2' /etc/apk/repositories | sed 's/main/community/' | tee -a /etc/apk/repositories
* Install `erlang-eldap` if you want to enable ldap authenticator
```shell
sudo apk add erlang-eldap
```
### Install PostgreSQL
* Install Postgresql server:
```shell
sudo apk add postgresql postgresql-contrib
```
* Initialize database:
```shell
sudo /etc/init.d/postgresql start
```
* Enable and start postgresql server:
```shell
sudo rc-update add postgresql
```
### Install media / graphics packages (optional, see [`docs/installation/optional/media_graphics_packages.md`](../installation/optional/media_graphics_packages.md))
**Note**: To execute a single command as the Pleroma system user, use `sudo -Hu pleroma command`. You can also switch to a shell by using `sudo -Hu pleroma $SHELL`. If you don’t have and want `sudo` on your system, you can use `su` as root user (UID 0) for a single command by using `su -l pleroma -s $SHELL -c 'command'` and `su -l pleroma -s $SHELL` for starting a shell.
* Git clone the PleromaBE repository and make the Pleroma user the owner of the directory:
* Answer with `yes` if it asks you to install `rebar3`.
* This may take some time, because parts of pleroma get compiled first.
* After that it will ask you a few questions about your instance and generates a configuration file in `config/generated_config.exs`.
* Check the configuration and if all looks right, rename it, so Pleroma will load it (`prod.secret.exs` for productive instance, `dev.secret.exs` for development instances):
* The previous command creates also the file `config/setup_db.psql`, with which you can create the database:
```shell
sudo -Hu postgres psql -f config/setup_db.psql
```
* Now run the database migration:
```shell
sudo -Hu pleroma MIX_ENV=prod mix ecto.migrate
```
* Now you can start Pleroma already
```shell
sudo -Hu pleroma MIX_ENV=prod mix phx.server
```
### Finalize installation
If you want to open your newly installed instance to the world, you should run nginx or some other webserver/proxy in front of Pleroma and you should consider to create an OpenRC service file for Pleroma.
#### Nginx
* Install nginx, if not already done:
```shell
sudo apk add nginx
```
* Setup your SSL cert, using your method of choice or certbot. If using certbot, first install it:
If that doesn’t work, make sure, that nginx is not already running. If it still doesn’t work, try setting up nginx first (change ssl “on” to “off” and try again).
* Copy the example nginx configuration to the nginx folder
* Before starting nginx edit the configuration and change it to your needs. You must change change `server_name` and the paths to the certificates. You can use `nano` (install with `apk add nano` if missing).
* (Strongly recommended) serve media on another domain
Refer to the [Hardening your instance](../configuration/hardening.md) document on how to serve media on another domain. We STRONGLY RECOMMEND you to do this to minimize attack vectors.
* Enable and start nginx:
```shell
sudo rc-update add nginx
sudo service nginx start
```
If you need to renew the certificate in the future, uncomment the relevant location block in the nginx config and run:
Questions about the installation or didn’t it work as it should be, ask in [#pleroma:libera.chat](https://matrix.to/#/#pleroma:libera.chat) via Matrix or **#pleroma** on **libera.chat** via IRC.
This guide will assume that you have administrative rights, either as root or a user with [sudo permissions](https://wiki.archlinux.org/index.php/Sudo). If you want to run this guide with root, ignore the `sudo` at the beginning of the lines, unless it calls a user like `sudo -Hu pleroma`; in this case, use `su <username> -s $SHELL -c 'command'` instead.
### Required packages
* `postgresql`
* `elixir`
* `git`
* `base-devel`
* `cmake`
* `file`
-* `rust`
#### Optional packages used in this guide
* `nginx` (preferred, example configs for other reverse proxies can be found in the repo)
* `certbot` (or any other ACME client for Let’s Encrypt certificates)
* `ImageMagick`
* `ffmpeg`
* `exiftool`
### Prepare the system
* First update the system, if not already done:
```shell
sudo pacman -Syu
```
* Install some of the above mentioned programs:
```shell
sudo pacman -S git base-devel elixir cmake file
```
### Install PostgreSQL
[Arch Wiki article](https://wiki.archlinux.org/index.php/PostgreSQL)
### Install media / graphics packages (optional, see [`docs/installation/optional/media_graphics_packages.md`](../installation/optional/media_graphics_packages.md))
**Note**: To execute a single command as the Pleroma system user, use `sudo -Hu pleroma command`. You can also switch to a shell by using `sudo -Hu pleroma $SHELL`. If you don’t have and want `sudo` on your system, you can use `su` as root user (UID 0) for a single command by using `su -l pleroma -s $SHELL -c 'command'` and `su -l pleroma -s $SHELL` for starting a shell.
* Git clone the PleromaBE repository and make the Pleroma user the owner of the directory:
* Answer with `yes` if it asks you to install `rebar3`.
* This may take some time, because parts of pleroma get compiled first.
* After that it will ask you a few questions about your instance and generates a configuration file in `config/generated_config.exs`.
* Check the configuration and if all looks right, rename it, so Pleroma will load it (`prod.secret.exs` for productive instance, `dev.secret.exs` for development instances):
* The previous command creates also the file `config/setup_db.psql`, with which you can create the database:
```shell
sudo -Hu postgres psql -f config/setup_db.psql
```
* Now run the database migration:
```shell
sudo -Hu pleroma MIX_ENV=prod mix ecto.migrate
```
* Now you can start Pleroma already
```shell
sudo -Hu pleroma MIX_ENV=prod mix phx.server
```
### Finalize installation
If you want to open your newly installed instance to the world, you should run nginx or some other webserver/proxy in front of Pleroma and you should consider to create a systemd service file for Pleroma.
#### Nginx
* Install nginx, if not already done:
```shell
sudo pacman -S nginx
```
* Create directories for available and enabled sites:
If that doesn’t work, make sure, that nginx is not already running. If it still doesn’t work, try setting up nginx first (change ssl “on” to “off” and try again).
---
* Copy the example nginx configuration and activate it:
* Before starting nginx edit the configuration and change it to your needs (e.g. change servername, change cert paths)
* (Strongly recommended) serve media on another domain
Refer to the [Hardening your instance](../configuration/hardening.md) document on how to serve media on another domain. We STRONGLY RECOMMEND you to do this to minimize attack vectors.
* Enable and start nginx:
```shell
sudo systemctl enable --now nginx.service
```
If you need to renew the certificate in the future, uncomment the relevant location block in the nginx config and run:
Questions about the installation or didn’t it work as it should be, ask in [#pleroma:libera.chat](https://matrix.to/#/#pleroma:libera.chat) via Matrix or **#pleroma** on **libera.chat** via IRC.
This guide will assume you are on Debian 12 (“bookworm”) or later. This guide should also work with Ubuntu 22.04 (“jammy”) and later. It also assumes that you have administrative rights, either as root or a user with [sudo permissions](https://www.digitalocean.com/community/tutorials/how-to-add-delete-and-grant-sudo-privileges-to-users-on-a-debian-vps). If you want to run this guide with root, ignore the `sudo` at the beginning of the lines, unless it calls a user like `sudo -Hu pleroma`; in this case, use `su <username> -s $SHELL -c 'command'` instead.
**Note**: To execute a single command as the Pleroma system user, use `sudo -Hu pleroma command`. You can also switch to a shell by using `sudo -Hu pleroma $SHELL`. If you don’t have and want `sudo` on your system, you can use `su` as root user (UID 0) for a single command by using `su -l pleroma -s $SHELL -c 'command'` and `su -l pleroma -s $SHELL` for starting a shell.
* Git clone the PleromaBE repository and make the Pleroma user the owner of the directory:
* Answer with `yes` if it asks you to install `rebar3`.
* This may take some time, because parts of pleroma get compiled first.
* After that it will ask you a few questions about your instance and generates a configuration file in `config/generated_config.exs`.
* Check the configuration and if all looks right, rename it, so Pleroma will load it (`prod.secret.exs` for productive instance, `dev.secret.exs` for development instances):
* The previous command creates also the file `config/setup_db.psql`, with which you can create the database:
```shell
sudo -Hu postgres psql -f config/setup_db.psql
```
* Now run the database migration:
```shell
sudo -Hu pleroma MIX_ENV=prod mix ecto.migrate
```
* Now you can start Pleroma already
```shell
sudo -Hu pleroma MIX_ENV=prod mix phx.server
```
### Finalize installation
If you want to open your newly installed instance to the world, you should run nginx or some other webserver/proxy in front of Pleroma and you should consider to create a systemd service file for Pleroma.
#### Nginx
* Install nginx, if not already done:
```shell
sudo apt install nginx
```
* Setup your SSL cert, using your method of choice or certbot. If using certbot, first install it:
If that doesn’t work, make sure, that nginx is not already running. If it still doesn’t work, try setting up nginx first (change ssl “on” to “off” and try again).
---
* Copy the example nginx configuration and activate it:
* Before starting nginx edit the configuration and change it to your needs (e.g. change servername, change cert paths)
* (Strongly recommended) serve media on another domain
Refer to the [Hardening your instance](../configuration/hardening.md) document on how to serve media on another domain. We STRONGLY RECOMMEND you to do this to minimize attack vectors.
* Enable and start nginx:
```shell
sudo systemctl enable --now nginx.service
```
If you need to renew the certificate in the future, uncomment the relevant location block in the nginx config and run:
Questions about the installation or didn’t it work as it should be, ask in [#pleroma:libera.chat](https://matrix.to/#/#pleroma:libera.chat) via Matrix or **#pleroma** on **libera.chat** via IRC.
Note: This article is potentially outdated because at this time we may not have people who can speak this language well enough to update it. To see the up-to-date version, which may have significant differences or important caveats of the installation process, look up the English version.
## 日本語訳について
この記事は [Installing on Debian based distributions](Installing on Debian based distributions) の日本語訳です。何かがおかしいと思ったら、原文を見てください。
Setup the required services to automatically start at boot, using `sysrc(8)`.
```
# sysrc nginx_enable=YES
# sysrc postgresql_enable=YES
```
## Initialize postgres
```
# service postgresql initdb
# service postgresql start
```
### Install media / graphics packages (optional, see [`docs/installation/optional/media_graphics_packages.md`](../installation/optional/media_graphics_packages.md))
Edit the defaults of `/usr/local/etc/nginx/sites-available/pleroma.nginx`:
* Change `ssl_trusted_certificate` to `/var/db/acme/certs/example.tld/example.tld.cer`.
* Change `ssl_certificate` to `/var/db/acme/certs/example.tld/fullchain.cer`.
* Change `ssl_certificate_key` to `/var/db/acme/certs/example.tld/example.tld.key`.
* Change all references of `example.tld` to your instance's domain name.
#### (Strongly recommended) serve media on another domain
Refer to the [Hardening your instance](../configuration/hardening.md) document on how to serve media on another domain. We STRONGLY RECOMMEND you to do this to minimize attack vectors.
## Creating a startup script for Pleroma
Pleroma will need to compile when it initially starts, which typically takes a longer
period of time. Therefore, it is good practice to initially run pleroma from the
command-line before utilizing the rc.d script. That is done as follows:
```
# su -l pleroma
$ cd $HOME/pleroma
$ MIX_ENV=prod mix phx.server
```
Copy the startup script to the correct location and make sure it's executable:
Update the `/etc/rc.conf` and start pleroma with the following commands:
```
# sysrc pleroma_enable=YES
# service pleroma start
```
#### Create your first user
If your instance is up and running, you can create your first user with administrative rights with the following task:
```shell
sudo -Hu pleroma MIX_ENV=prod mix pleroma.user new <username> <your@emailaddress> --admin
```
## Conclusion
Restart nginx with `# service nginx restart` and you should be up and running.
Make sure your time is in sync, or other instances will receive your posts with
incorrect timestamps. You should have ntpd running.
## Questions
Questions about the installation or didn’t it work as it should be, ask in [#pleroma:libera.chat](https://matrix.to/#/#pleroma:libera.chat) via Matrix or **#pleroma** on **libera.chat** via IRC.