Page MenuHomePhorge

No OneTemporary

Authored By
Unknown
Size
8 KB
Referenced Files
None
Subscribers
None
diff --git a/installation/caddyfile-pleroma.example b/installation/caddyfile-pleroma.example
index fcf76718e..7985d9c67 100644
--- a/installation/caddyfile-pleroma.example
+++ b/installation/caddyfile-pleroma.example
@@ -1,36 +1,38 @@
# default Caddyfile config for Pleroma
#
# Simple installation instructions:
# 1. Replace 'example.tld' with your instance's domain wherever it appears.
# 2. Copy this section into your Caddyfile and restart Caddy.
example.tld {
log /var/log/caddy/pleroma_access.log
errors /var/log/caddy/pleroma_error.log
gzip
- proxy / localhost:4000 {
+ # this is explicitly IPv4 since Pleroma.Web.Endpoint binds on IPv4 only
+ # and `localhost.` resolves to [::0] on some systems: see issue #930
+ proxy / 127.0.0.1:4000 {
websocket
transparent
}
tls {
# Remove the rest of the lines in here, if you want to support older devices
key_type p256
ciphers ECDHE-ECDSA-WITH-CHACHA20-POLY1305 ECDHE-RSA-WITH-CHACHA20-POLY1305 ECDHE-ECDSA-AES256-GCM-SHA384 ECDHE-RSA-AES256-GCM-SHA384 ECDHE-ECDSA-AES128-GCM-SHA256 ECDHE-RSA-AES128-GCM-SHA256
}
# If you do not want to use the mediaproxy function, remove these lines.
# To use this directive, you need the http.cache plugin for Caddy.
cache {
match_path /media
default_max_age 720m
}
cache {
match_path /proxy
default_max_age 720m
}
# Stop removing lines here.
}
diff --git a/installation/pleroma-apache.conf b/installation/pleroma-apache.conf
index 2beb7c4cc..b5640ac3d 100644
--- a/installation/pleroma-apache.conf
+++ b/installation/pleroma-apache.conf
@@ -1,72 +1,74 @@
# default Apache site config for Pleroma
#
# needed modules: define headers proxy proxy_http proxy_wstunnel rewrite ssl
# optional modules: cache cache_disk
#
# Simple installation instructions:
# 1. Install your TLS certificate, possibly using Let's Encrypt.
# 2. Replace 'example.tld' with your instance's domain wherever it appears.
# 3. This assumes a Debian style Apache config. Copy this file to
# /etc/apache2/sites-available/ and then add a symlink to it in
# /etc/apache2/sites-enabled/ by running 'a2ensite pleroma-apache.conf', then restart Apache.
#
# Optional: enable disk-based caching for the media proxy
# For details, see https://git.pleroma.social/pleroma/pleroma/wikis/How%20to%20activate%20mediaproxy
#
# 1. Create the directory listed below as the CacheRoot, and make sure
# the Apache user can write to it.
# 2. Configure Apache's htcacheclean to clean the directory periodically.
# 3. Run 'a2enmod cache cache_disk' and restart Apache.
Define servername example.tld
ServerName ${servername}
ServerTokens Prod
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
<VirtualHost *:80>
Redirect permanent / https://${servername}
</VirtualHost>
<VirtualHost *:443>
SSLEngine on
SSLCertificateFile /etc/letsencrypt/live/${servername}/cert.pem
SSLCertificateKeyFile /etc/letsencrypt/live/${servername}/privkey.pem
SSLCertificateChainFile /etc/letsencrypt/live/${servername}/fullchain.pem
# Mozilla modern configuration, tweak to your needs
SSLProtocol all -SSLv3 -TLSv1 -TLSv1.1
SSLCipherSuite ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256
SSLHonorCipherOrder on
SSLCompression off
SSLSessionTickets off
# uncomment the following to enable mediaproxy caching on disk
# <IfModule mod_cache_disk.c>
# CacheRoot /var/cache/apache2/mod_cache_disk
# CacheDirLevels 1
# CacheDirLength 2
# CacheEnable disk /proxy
# CacheLock on
# </IfModule>
RewriteEngine On
RewriteCond %{HTTP:Connection} Upgrade [NC]
RewriteCond %{HTTP:Upgrade} websocket [NC]
RewriteRule /(.*) ws://localhost:4000/$1 [P,L]
ProxyRequests off
- ProxyPass / http://localhost:4000/
- ProxyPassReverse / http://localhost:4000/
+ # this is explicitly IPv4 since Pleroma.Web.Endpoint binds on IPv4 only
+ # and `localhost.` resolves to [::0] on some systems: see issue #930
+ ProxyPass / http://127.0.0.1:4000/
+ ProxyPassReverse / http://127.0.0.1:4000/
RequestHeader set Host ${servername}
ProxyPreserveHost On
</VirtualHost>
# OCSP Stapling, only in httpd 2.3.3 and later
SSLUseStapling on
SSLStaplingResponderTimeout 5
SSLStaplingReturnResponderErrors off
SSLStaplingCache shmcb:/var/run/ocsp(128000)
diff --git a/installation/pleroma.nginx b/installation/pleroma.nginx
index cc75d78b2..7425da33f 100644
--- a/installation/pleroma.nginx
+++ b/installation/pleroma.nginx
@@ -1,92 +1,94 @@
# default nginx site config for Pleroma
#
# Simple installation instructions:
# 1. Install your TLS certificate, possibly using Let's Encrypt.
# 2. Replace 'example.tld' with your instance's domain wherever it appears.
# 3. Copy this file to /etc/nginx/sites-available/ and then add a symlink to it
# in /etc/nginx/sites-enabled/ and run 'nginx -s reload' or restart nginx.
proxy_cache_path /tmp/pleroma-media-cache levels=1:2 keys_zone=pleroma_media_cache:10m max_size=10g
inactive=720m use_temp_path=off;
server {
server_name example.tld;
listen 80;
listen [::]:80;
return 301 https://$server_name$request_uri;
# Uncomment this if you need to use the 'webroot' method with certbot. Make sure
# that the directory exists and that it is accessible by the webserver. If you followed
# the guide, you already ran 'sudo mkdir -p /var/lib/letsencrypt' to create the folder.
# You may need to load this file with the ssl server block commented out, run certbot
# to get the certificate, and then uncomment it.
#
# location ~ /\.well-known/acme-challenge {
# root /var/lib/letsencrypt/.well-known/acme-challenge;
# }
}
# Enable SSL session caching for improved performance
ssl_session_cache shared:ssl_session_cache:10m;
server {
server_name example.tld;
listen 443 ssl http2;
listen [::]:443 ssl http2;
ssl_session_timeout 5m;
ssl_trusted_certificate /etc/letsencrypt/live/example.tld/chain.pem;
ssl_certificate /etc/letsencrypt/live/example.tld/fullchain.pem;
ssl_certificate_key /etc/letsencrypt/live/example.tld/privkey.pem;
# Add TLSv1.0 to support older devices
ssl_protocols TLSv1.2;
# Uncomment line below if you want to support older devices (Before Android 4.4.2, IE 8, etc.)
# ssl_ciphers "HIGH:!aNULL:!MD5 or HIGH:!aNULL:!MD5:!3DES";
ssl_ciphers "ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384:!aNULL:!eNULL:!EXPORT:!DES:!MD5:!PSK:!RC4";
ssl_prefer_server_ciphers on;
# In case of an old server with an OpenSSL version of 1.0.2 or below,
# leave only prime256v1 or comment out the following line.
ssl_ecdh_curve X25519:prime256v1:secp384r1:secp521r1;
ssl_stapling on;
ssl_stapling_verify on;
gzip_vary on;
gzip_proxied any;
gzip_comp_level 6;
gzip_buffers 16 8k;
gzip_http_version 1.1;
gzip_types text/plain text/css application/json application/javascript text/xml application/xml application/xml+rss text/javascript application/activity+json application/atom+xml;
# the nginx default is 1m, not enough for large media uploads
client_max_body_size 16m;
location / {
proxy_http_version 1.1;
proxy_set_header Upgrade $http_upgrade;
proxy_set_header Connection "upgrade";
proxy_set_header Host $http_host;
- proxy_pass http://localhost:4000;
+ # this is explicitly IPv4 since Pleroma.Web.Endpoint binds on IPv4 only
+ # and `localhost.` resolves to [::0] on some systems: see issue #930
+ proxy_pass http://127.0.0.1:4000;
client_max_body_size 16m;
}
location ~ ^/(media|proxy) {
proxy_cache pleroma_media_cache;
slice 1m;
proxy_cache_key $host$uri$is_args$args$slice_range;
proxy_set_header Range $slice_range;
proxy_http_version 1.1;
proxy_cache_valid 200 206 301 304 1h;
proxy_cache_lock on;
proxy_ignore_client_abort on;
proxy_buffering on;
chunked_transfer_encoding on;
proxy_ignore_headers Cache-Control;
proxy_hide_header Cache-Control;
proxy_pass http://localhost:4000;
}
}

File Metadata

Mime Type
text/x-diff
Expires
Wed, Nov 18, 8:36 PM (1 d, 21 h)
Storage Engine
blob
Storage Format
Raw Data
Storage Handle
1840707
Default Alt Text
(8 KB)

Event Timeline